Becker CNC Router Vacumm Pump, CNC Router Vacuum Pump Advantage W
Becker CNC Vacuum Pumps Advantage W
- 100% Oil-less/Dry operation
- Duplex and Triplex stacked arrangements
- Single inlet connection
- 130 to 1059 CFM Capacity
- 7.5 to 72 HP
- Double or Triple onlet filtration
Advantage-W systems have been specifically designed for the changing needs of those in the woodworking field.
Becker oil-less, dry vacuum pumps have long been the most popular brand and type of pump used in product hold down for vacuum tables. With no oil or water use,
any risk of product contamination is eliminated, and operational and maintenance costs are reduced to a minimum; in fact, these are the most maintenance free systems in the world.
Becker has designed a full line of central vacuum systems, called the Advantage-W, that are specifically designed to meet the changing needs of those in the woodworking field. These systems
are designed for spoil board applications, faster cutting speeds, and shorter changeover due to their flexibility.
Advantage-W systems employ our well respected VTLF series of pumps with individual capacities of 130, 173, 280, and 353 CFM (total capacities ranging from 260 to 706 CFM) and a continuous operating
vacuum level as high as 25"Hg, which provides plenty of hold-down force -- over 12 pounds of force per square inch of surface area. That's a total force of nearly a ton for a 12" x 12" piece!
The new Advantage-W systems can be operated incrementally to match your production demand. This means that you run only the necessary pumps, thus saving precious energy and reducing operating costs.
Advantage-W systems are available in 4 Duplex and 2 Triplex models in a space-saving vertical arrangement, which also gives easy access to any part of the pump. Each pump in the system includes its
own built-in inlet filter, and each pump is connected to an integral manifold that eliminates unsightly piping arrangements and minimizes losses due to piping leaks. In addition, Becker includes,
as standard equipment, a central inlet filter for primary filtration.
As an additional benefit to our customers, an optional dust trap is offered that separates and removes the bulk of any product particles that may enter the vacuum system. This dust trap has a fine
screen to remove larger particles that can clog standard inlet filters, and a transparent housing to permit visual observation of the amount of debris that is collected so that workers can easily
tell when the separator needs cleaning.
Since any product eventually needs servicing, you will appreciate the fact that no other pump is so easy to service. Backer pumps can be serviced by nearly anyone using standard tools. Filters are
conveniently located at the side of the pump; and should vanes need replacing, it can be done in a few minutes by removing a few bolts at the end of the pump. As an aid, becker provides a liquid
filled vacuum gauge at the inlet of each pump in the system. By closing the standard isolation valve, the pump operating vacuum can be easily determined.
To make installation easy, a single inlet connection point is provided. Each pump can be isolated from the manifold for service without affecting the operation of the other pumps.
Becker offers a variety of electrical control options, ranging from manually operated motor starters mounted on the motors, to custom designed controls for automatic start/stop operation.
| Manufacturer | Machine Model |
Machine Type |
Stock Number |
Becker | Advantage W |
CNC Vacuum Pumps |
0000105 |
Call for a competitive quote at 1-800-323-7430
|
